Electronics production and assembly

Specialists in the sector

In industry 4.0 robots are becoming increasingly more important. In the field of robotics, we see a shift in the market from large robots to smaller compact units and collaborative robots, or co-bots for short. In addition, the Internet of Things (IoT) is receiving increasing attention and electronics are also becoming increasingly more important here.


All of these solutions require an electrical power supply or converter to operate. With the growing demand, the demand for higher quality products in increasingly compact dimensions is also increasing. For the assembly of the PCB, a power supply with a small footprint is required that is still reliable and does not suffer from EMC.


As Elipse, we have a major asset by being the exclusive distributor of a number of manufacturers specializing in electronic components. This ensures that we can offer very good price / technical products, but also solutions tailored to the customer.

Elipse offers

  • Excellent price / technical solutions
  • Cooperation with specialized electronics manufacturers
  • Extensive range of inspections (eg military, medical, railroad, etc.)
  • In-house engineers who visit the customer
  • Possibility to supply samples

NEW MORNSUN cost-effective AC/DC series

MORNSUN launches new cost-efficient high insulating AC / DC converter series (LDE and LHE series). These series are based on the original LD ​​and LH series. Due to improved design and production techniques, the LDE and LHE series have better performance and are a lot more compact. They are approved for the IEC62368, UL62368 and EN62368 certifications.

Mornsun: LDE15-20B
Mornsun: LHE05-20Dxx

1. Applications


  • Widely used in LED and street lighting, power grid, instruments and meters, industrial control, telecom, IoT, smart home, smart meters and other areas.

2. Features

  • Universal input: 85-264VAC / 100-370VDC
  • Temperature range: -40 ° C to +70 ° C (LDE series) / -40 ° C to +85 ° C (LHE series)
  • High insulation voltage: 4000VAC
  • Low ripple & noise: 50mvPP.
  • Output short circuit, over current, over voltage protection
  • Plastic housing, complies with UL94V-0
  • EMI performance complies with CISPR32 / EN55032 CLASS B
  • Approved for the IEC62368, UL62368, EN62368 standard

3. Advantages


Better performance


  • Wider temperature range: LDE series – 40 ° C to +70 ° C; LHE series – 40 ° C to +85 ° C
  • High insulation voltage: 4000vac, improves product reliability and system safety
  • Better EMC performance: EMI performance complies with CISPR32 / EN55032 CLASS B


More compact size


  • The internal components of the LDE and LHE series are highly integrated and therefore are 20% more compact.
  • Improved production techniques guarantee better consistency and better performance


High reliability, full protection package


  • MTBF greater than 3000hrs with output short circuit, over current and over voltage protection. This decreases the converter failure rate and significantly improves safety performance.
  • The LDExx-20Bxx series has recently been expanded with the 45W and 60W models – already available in 2W, 3W, 5W, 6W, 10W, 15W and 20W
  • The LHExx-20Bxx series has recently been expanded with 40W and 60W models – already available in: 5W, 10W, 15W, 20W and 25W

The MORNSUN R3 series DC / DC converters now available in a range from 0.25W to 200W

At the launch of MORNSUN’s R3 series DC / DC converters, these were available up to 40W. Meanwhile, this series consists of high-end converters that have been further expanded to 200W. Some of the exceptional features are:

  • High performance
  • Cost efficient
  • Low EMI values
  • Multiple insulation voltages
  • UL / CE approved
Application of R3 series MORNSUN

Overview of MORNSUN DC/DC converters

NON-insulated DC-DC regulator K78xx-R3

Applications : 

Industrial control, instrumentation and electrical power


  • Stable voltage: a regulator is needed to convert an unstable voltage source into a stable voltage source.
  • Resolves temperature rise and saves space: NO heat sink is required, this saves 40% space
  • Save on design costs and minimize power consumption: K78xx-R3 offers significant advantages to replace the IC solution (discrete) and replace the drop-in linear controllers

Advantages of the K78xx-R3?

  • Efficiency up to 96% (NO heat sink required)
  • Standby input current as low as 0.1 mA
  • Fast dynamic response time 0.1 ms
  • Negative output available

Specifications :

  • Wide input voltage range from 4.5-36VDC
  • Short circuit protection
  • Pin-out compatible with LM78xx linear regulators
  • Open frame, standard SIP package and recently also available in SMD

PCB relay with one or two contacts in different installation heights

DOLD’s PCB relays, also known as plug-in/print relays, are used for the galvanic isolation of the circuits as well as for signal adaptation and amplification. The vertical and horizontal designs allow optimal adaptation to the application. The DOLD PCB relays with a maximum continuous current of 16A are available with one or two contacts, in different installation heights and with different contact materials.


In addition to the ordinary PCB relays, DOLD also has an extensive product portfolio of safety relays with forced conductive contacts, miniature relays and bi-stable relays. In this way, we offer you options for switching safety and high currents in very small spaces.